Skip to content
AIDC GORequest a quote
Home/Industries/Construction
RT-I10A 10.1-inch rugged Windows tablet
Industry application · Construction

Rugged tablets for construction sites

Take the current drawings to the work face, record snags where you find them and close them on a second walk.

Request a quoteView recommended models
Application scenario

What the team needs to do

Drawings at the work face

Open the current revision of a drawing where the work is being done, with or without a signal.

Snag and punch lists

Pin each defect to its location, add a photo, assign it, then re-inspect and close it.

Site records

Fill in inspection forms and daily records on the walk, with photos attached to each entry.

Configuration guide

Drawings, input and a full day on site

  • Screen size for drawings.Open your most detailed sheet on a sample and place a pin on one door among many before you choose 10, 12 or 14 inches.
  • Pen and glove input.Decide whether inspectors mark up drawings with a pen, and test touch with the gloves worn on site.
  • Dust, rain and battery swaps.Check the protection rating, how the tablet is carried on ladders, and whether the battery can be changed during a walk.

Scroll sideways to compare all models.

SpecificationRT-I10ART-I20JRT-I14MRT-T17X
Operating systemWindows 11 ProWindows 11 IoTWindows 11 ProAndroid 14 (GMS)
Screen size10.1 in12.2 in14.0 in10.1 in
Standard brightness700 nits650 nits1,000 nits700 nits
Protection ratingIP65IP65IP65IP65
StylusStandardOptional——
Weight1,230 gApprox. 1,500 g (bare unit)2,350 g1,140 g

A dash marks a specification without a published value.

Recommended models

Models for this application

RT-I10A

10.1" Rugged Windows Tablet

A 10.1-inch Windows tablet with stylus support as standard, for inspectors who walk the site all day.

View specifications →

RT-T17X

10.1" Rugged Android Tablet

A 10.1-inch, 700-nit Android tablet with a removable battery, for snagging apps that run on Android.

View specifications →
View rugged tablets →

All models for Construction

Rugged tablets

Notebooks & 2-in-1

Samples, terms & support

Working with AIDC GO

Samples

You can request a sample for evaluation.

Volume customization

Volume orders can include a custom logo, startup screen, enclosure colour, preinstalled software and packaging.

Warranty

AIDC GO provides a 1-year warranty.

Ordering

The minimum order quantity for standard products is 1 unit. Standard configurations typically ship within 7 days; lead time for volume and custom orders is confirmed in the quotation.

English datasheets

Download the English datasheet from each product page.

Enquiries

We reply within 24 hours.

Before you enquire

What to include in your quotation request

  1. Site task: drawings, snagging, inspections or daily records
  2. Site management or snagging application, and operating system
  3. A sample drawing and the sheet size you use most
  4. Pen input, and the gloves worn on site
  5. Length of a site walk and how tablets are charged
  6. Quantity and target market
Common questions

Questions about the shortlisted models

Which models on this page support a stylus?

The RT-I10A supports a stylus as standard. The RT-I20J lists an active stylus as an option.

Which screen is the brightest?

The RT-I14M lists 1,000 nits. The RT-I10A and RT-T17X list 700 nits, and the RT-I20J lists 650 nits.

Can the battery be changed during a site walk?

The RT-I20J lists a hot-swappable battery. The RT-I10A, RT-I14M and RT-T17X list removable batteries.

Which models run Android?

The RT-T17X runs Android 14 with GMS. The other three shortlisted models run Windows 11.

What should a site trial include?

Open a real drawing, record ten snags with photos on one floor without a signal, and check that all ten arrive after reconnecting.

Related resources

Selection and installation guides

Snag lists: from the defect to a closed item →Construction drawings: revisions and offline access →Pens, digitizers and field annotation →

Discuss your site workflow

Request a quote