Skip to content
AIDC GORequest a quote

Solutions

Mobile barcode data capture

Use a barcode handheld to identify items and locations and enter data into your existing workflow.

AIDC GO HX-21 Keyboard barcode handheld — front

Recommended devices

AIDC GO HX-21 Keyboard barcode handheld — front

HX SERIES

AIDC GO HX-21

Keyboard barcode handheld · 4 in IPS · 1D/2D barcode scanning; engine configuration dependent

View specs →
AIDC GO HX-24 Touchscreen barcode handheld — front

HX SERIES

AIDC GO HX-24

Touchscreen barcode handheld · 6 in FHD, 1080 × 2160 · 1D/2D barcode scanning

View specs →
AIDC GO HX-27 Keypad barcode handheld — front

HX SERIES

AIDC GO HX-27

Keypad barcode handheld · 4 in, 800 × 480 · 1D/2D barcode scanning

View specs →

Typical tasks

Receive items

Read item and document labels, enter quantities and show discrepancies in the receiving application. Check the relationship between a scanned identifier and the item shown on screen. Use an unexpected receipt and a partial quantity to establish what the operator sees before stock is accepted.

Pick and verify

Scan the location and item, then confirm the requested quantity and exceptions. Keep the order, location and tote in the same trial sequence. Include a wrong location and a short pick, and show how the operator corrects the error without starting an unrelated transaction.

Count stock

Associate each count with the item and location, including corrections and repeat scans. Decide whether a count is blind or shows the expected stock. Repeat the exercise with a changed unit of measure and a recount, retaining the record needed to explain the difference.

Identify inspection records

Use a barcode to select the relevant item or asset before entering the inspection result. Start with the actual asset or item label and the form it should open. Check a duplicate identifier and an unavailable record, including the action required when the expected screen cannot be displayed.

What to compare

  • Test the smallest, damaged and neighbouring labels used at the work point.
  • Compare keyboard, keypad and touchscreen input for quantities and corrections.
  • Review handling, gloves, lighting and the working distance with representative samples.
  • Match the required operating system and connections to the application.

Make a compact label set that represents the smallest symbol, poor print, adjacent codes and the normal working surface. Record the code type and the value expected by the application for each example. Keep data entry, scan feedback and final transaction acceptance visible in the trial. Include the application version, required OS, deployment country and estimated quantity in the inquiry, with any open questions about the scan configuration. Record the label, destination field and operator feedback for every trial transaction. Use the discrepancy log to decide which scan-engine or application setting needs attention before repeating that transaction.

Choose a model shortlist

HX-21 combines a keyboard with a four-inch display and Android 15. HX-24 lists a six-inch touchscreen and Android 15. HX-27 lists Android 14, a four-inch display and 24 front keys. Use these listed differences to choose a sample shortlist, then check the complete task in your own application.

For application ownership, sample checks and deployment preparation, see Integration & Support →

FAQ

Does reading a barcode complete the transaction?

The reader supplies the value. The application checks it and determines whether to accept the transaction.

Which HX model should we compare?

HX-21 uses a keyboard, HX-24 a six-inch touchscreen and HX-27 a keypad. Compare those inputs with the screens and tasks your operators use.

Can we request a sample?

Use the inquiry form to discuss the model, scan configuration and sample needed for your labels and application.

Tell us about your project

Send the application, operating system and where the device will be used.

Request a quote