Barcode Component Traceability: Link Parts to the Finished Unit During Assembly
A component scan is not an as-built record. Follow a serial board and two lot-managed parts through assembly, mismatch, rework and forward/reverse trace checks.
AIDC GO RESOURCES
Guides for choosing and deploying rugged devices
Selection guides, technical foundations and practical checklists for your next hardware project.
All guides
Showing 61–72 of 190 guides
Barcode Batch and Expiry Checks: Apply FEFO Rules During Picking
A scanned batch and date are inputs, not a FEFO decision. Compare expiry, stock status and order rules across three lots, then verify the picked batch and final inventory transaction.
GS1 Digital Link QR Codes on Handhelds: Turn the Scan into Business Fields
A QR scan may return a GS1 Digital Link URI rather than a product code. See how to parse GTIN, lot and serial values, map them to the receiving task and handle mismatches.
UHF RFID Access Passwords and Locking: Define What Must Stay Readable and Writable
Plan UHF RFID inventory and maintenance access without treating a password as encryption. Compare reversible and permanent lock outcomes on the exact tag, reader and application.
Kiosk Mode on Rugged Android Handhelds: Keep the Defined workflow Usable
Check whether a restricted Android handheld can still scan, capture an exception photo, return to its task, submit work and recover safely after interruption.
Warehouse Returns with Barcode Handhelds: Identify, Inspect and Route Returned Stock
Follow a two-unit warehouse return from authorization and parcel receipt to item inspection and specified disposition without confusing a successful scan with sellable stock.
NFC Tag UIDs for Asset Identification: Match the Identifier to the Record
Trace an NFC tag identifier from the device to the correct asset record, avoid truncated-ID collisions, and control tag replacement without treating a UID as authentication.
Built-in Printer Handhelds: Fit Barcodes and QR Codes to the Printable Area
Calculate whether a barcode or QR symbol and its quiet zone fit the effective print area, then verify paper output, decoded data and project quality separately.
Barcode Picking Verification: Match the Location, Item and Order Tote
Verify the source location, item, tracking identity, quantity and destination tote in one warehouse picking task, including mismatch and short-pick exceptions.
Pallet Receiving with Barcode Handhelds: Match the SSCC to the Shipment Record
Use a barcode handheld to identify each pallet by SSCC, match it to the expected shipment record and route duplicates, unexpected units and content differences correctly.
RFID Tool Tracking with Handheld Readers: Check-Out, Return and Missing-Tool Exceptions
Connect RFID tool reads to authorised check-out, return and missing-tool decisions without confusing a tag count with asset identity or custody status.
Barcode Duplicate Reads in Continuous Scanning: Decide When to Suppress or Accept Repeats
Separate scanner repeat controls from application transaction rules so rapid barcode scanning suppresses accidental duplicates without losing intentional repeats.
